Mitch’s Certified Classes

Cross Connection Control Specialist

CCCS-Quiz-1

Please enter the password provided by the Instructor below and select the "Start" button to begin.
By checking the box, I acknowledge that I have read, understand, and agree to comply with the Instructions and Conduct of Conduct provided by Mitch's Certified Classes, Inc.

1 / 50

1. A backflow assembly intended for hot water use must be of a listed type and engineered to function at temperatures that are equal to or exceed:

2 / 50

2. What separation is mandated for recycled water piping and potable water piping installed within the same trench?

3 / 50

3. Backflow assembly tester certification could be withdrawn due to:

4 / 50

4. What components might be found in an approved atmospheric vacuum breaker?

5 / 50

5. What is the main factor influencing the reversal of water flow in pipelines?

6 / 50

6.   Define an RP backflow assembly:

7 / 50

7. Backsiphonage resulting from an aspirator effect can be triggered by:

8 / 50

8. The main factor considered when determining whether to install an RP assembly or a DC assembly is:

9 / 50

9. As per the UPC Cross-Connection Test, the depressurized system should remain depressurized for no less than:

10 / 50

10. If a cross-connection is discovered during a cross-connection test, the domestic water system must be chlorinated with:

11 / 50

11. How many methods of cross-connection protection exist?

12 / 50

12. What is the suggested service protection for a multi-story building?

13 / 50

13. As per the Uniform Plumbing Code, if the critical level isn't indicated on the backflow unit:

14 / 50

14.  A water closet flushometer valve must include an approved vacuum breaker installed on the discharge side of the valve, ensuring the critical level is positioned at least:

15 / 50

15.   An appropriate backflow prevention assembly includes:

16 / 50

16. When denied access to a property, the water supplier should:

17 / 50

17. An RP backflow assembly may be provided instead of an air gap for premises using recycled water without a connection to the potable supply, if authorized by:

18 / 50

18. An Atmospheric Vacuum Breaker must not be utilized:

19 / 50

19. Which of these factors is not essential to an effective cross-connection control program?

20 / 50

20. A pressure of 60 psi in a water line will elevate water approximately:

21 / 50

21. As per State regulations, in locations where recycled water is utilized without connection to the potable water system, the necessary type of backflow protection is:

22 / 50

22. How many inches above the point of use should the PVB be installed?

23 / 50

23.  Any water supply found on or accessible to a premise, aside from the public water supply, is categorized as a:

24 / 50

24. As per the UPC, potable water piping is prohibited from installation or maintenance within:

25 / 50

25. Recycled water piping and related components must be labeled using:

26 / 50

26. A proper air gap separation mandates that the effective opening of the water supply line above the flood rim of the receptacle must never be less than:

27 / 50

27. Backflow from a direct pressure connection to a food processing line containing edible syrup under pressure into a drinking water line can be safeguarded by a:

28 / 50

28. The recommended type of backflow assembly installation to protect the water system from a  plant using radioactive material is:

29 / 50

29.  Grey water is described as water collected from:

30 / 50

30. Prior of conducting a cross-connection survey of a premises, the specialist should:

31 / 50

31. A municipal regulation implementing a cross-connection control program might mandate that:

32 / 50

32. Undersized water piping transporting water at high velocity may result in back siphonage due to:

33 / 50

33. A steam boiler linked to the potable water system is classified as:

34 / 50

34. The two classifications of cross-connections are:

35 / 50

35. The weight of one cubic foot of water is:

36 / 50

36. Once water has passed through the water connection from the public potable water system and is no longer under the control of the Water Purveyor/Supplier, what is it considered?

37 / 50

37. A water supplier is required to maintain current records to oversee a cross-connection control program, encompassing:

38 / 50

38. Maps and as-built drawings of the consumer’s potable water system:

39 / 50

39. Before construction begins, a plan review should be conducted to determine:

40 / 50

40. A water agency or health agency might mandate testing of a backflow assembly more frequently based on performance records. What is the longest allowable interval between tests?

41 / 50

41. The principal obligation for mandating the testing, maintenance, and reporting on service protecting backflow assemblies typically lies with the:

42 / 50

42. Back-pressure can induce backflow through:

43 / 50

43. At locations where gray water is utilized, safeguarding the potable water system requires:

44 / 50

44. The recommended installation for protecting the water system from food and beverage processing facilities is:

45 / 50

45. To safeguard the water system from a facility utilizing radioactive materials, the suggested type of backflow assembly installation is:

46 / 50

46. Steam boilers are classified as high hazard due to:

47 / 50

47.  A closed-loop double-walled heat exchanger linked to an HVAC system presents a potential risk to the domestic water system because:

48 / 50

48. Solar heating systems are a potential hazard to the potable water system because:

49 / 50

49. Under what circumstances is a solar heating system not deemed a potential hazard to the water system?

50 / 50

50. A fire sprinkler system supplied directly from a public water system and utilizing anti-freeze or other additives is categorized as:

Your score is

Exit